Trigger" Menu - AEMC OX III Series User Manual

Multimeter Mode (contd.)
Frequency
Statistics
Relative mode
Faults
Shop for AEMC products online at:
V - 112
Multimeter Mode - The "Trigger", "Horizontal" and "Display" Menus
In the event of alternative amplitude, display of the frequency of the signal
measured (if possible and coherent) as a secondary measurement on each
channel.
Display of the Min and Max values of the measurements taken as
secondary measurements on each channel.
Display of variance as secondary measurement on each channel.
The variance displayed is the difference between the value measured and
the value displayed when this option was selected.
The " " symbol indicates the secondary function selected.
Display of the characteristics of all faults (maximum of 100) acquired:
• Fault detection instant,
• Fault type,
• Measurement that triggered a fault.
Faults are defined in the "Trigger" menu.
Use the "Erase" button to reinitialize this list.
Use the "Save '.TXT'" button to save all the faults on this table to a .TXT format
file. A dialogue window is displayed to request the name of the file to be
generated.
ShopAEMC
www. .com 1.877.766.5412
SCOPIX