Table of Contents
Advertisement
Description of the instrument (cont'd)
Initial operation of
the oscilloscope
Fuse
Starting up
Shop for AEMC products online at:
II - 16
The portable oscilloscopes in this range are designed to operate on a power
source delivering 98 to 264 V (ACrms) or in stand-alone mode with a battery.
The instruments are delivered with a mains adapter, an external power supply
(battery charger) and an Ni-MH battery (9.6V, 3.5Ah).
Type: time delay, 2.5 A, 250 V, 5 x 20 mm
The external power supply is equipped with a protection fuse that must only be
replaced with an identical model.
Replacement must only be performed by qualified personnel.
Contact your nearest service centre.
• Connect the 4-point lead of the external power supply to the "'DC-Input"
socket located on the side of the oscilloscope.
Do not insert any metal objects into this lead.
• Connect the mains lead from the external power supply to the external
power supply.
The POWER LED on the adapter lights up, indicating that it is live.
The CHARGE LED flashes, indicating:
• the absence of the battery or
• slow charging of the battery, if it is present in the oscilloscope.
Press the instrument's ON switch: it lights on and then a clock is displayed on
the screen during the start-up sequence.
The message "Instrument start-up" is displayed.
The oscilloscope is then ready for use.
By default, the "Advanced" mode is not active (see page 98).
The symbol
the instrument is connected to the mains supply.
ShopAEMC
www.
in the display area for the current value means that
.com
Description of the instrument
external power supply
1.877.766.5412
SCOPIX
Advertisement
Table of Contents
