Oscilloscope Mode - The "Trigger" Menu
Oscilloscope Mode (cont'd)
Example
Signal injected on CH1: a train of three 6 V
pulses at a frequency of 20 kHz
DC
separated by 500 µs.
The trigger is active after the end of the delay (35.2 µs) on the first ascending
edge.
The Holdoff stabilizes the signal by disabling the trigger for 108 µs.
ShopAEMC
www.
.com
1.877.766.5412
Shop for AEMC products online at:
IV - 72
SCOPIX