AEMC OX III Series User Manual page 105

Multimeter Mode - Display
Multimeter Mode (cont'd)
2. Channel (x)
multimeter)
Channel
Coupling
Autorange
Symbols
Main
measurement
Unit
Secondary
measurement
3. Cursor value
Shop for AEMC products online at:
SCOPIX
There is a display area reserved for each of the instrument's channels. In each
of these, the following information is indicated:
Auto-
Ch. Coupling
ranging
Principal measurement
Secondary measurement
CH1, CH2, CH3 or CH4
The input coupling selected (see §. Vert. Menu) is indicated in this field. For
the Ohmmeter, Capacimeter, Continuity, Component Test, Wattmeter, the
coupling is not shown.
Indicates whether range changing is automatic.
A symbol is displayed corresponding to the type of selected measurement :
Ohmmeter,
╫ Capacimeter,
Continuity
Component test
PT100 Temperature measurement
If the channel is activated, the measurement result is displayed. Otherwise, the
message '– X –' fills the unused space.
Contains the measurement unit associated with the current measurement
range.
Selected through the "Display" menu.
If no display is selected or if the display is not possible (e.g. frequency
measurement for a continuous signal, etc.), the character string
'-----' is displayed.
If the channel is not selected, '– X –' is displayed.
Display of the absolute position of the cursor on the measurement reference
channel.
Time position: hour, minute, second
Level position: depending on the type of measurement.
If your instrument is equipped with the "EXTENDED ACQUISITION MEMORY"
option, an indication of the zoom status is also displayed (Zoom ON / Zoom
OFF) in this zone.
ShopAEMC
www.
Symbol
Channel
Unit
Principal measurement
Secondary measurement
Cursor (Ref)
Hour; minute; second
Level
.com
Symbol
Unit
1.877.766.5412
V - 105