AEMC OX III Series User Manual page 153

Recorder Mode - The "Utilities" Menu
Recorder Mode (cont'd)
File manager
I/O port config
Hardcopy
Configuration
Screen saver
Standby
System infos
"Advanced" mode
Functions available in
"Advanced" mode
only
Shop for AEMC products online at:
SCOPIX
This function is identical to that described in "Oscilloscope" mode.
Identical to "Oscilloscope" mode.
Identical to "Oscilloscope" mode.
Identical to "Oscilloscope" mode.
•
If the recording time is over 2 seconds, the screen saver will never be
activated.
•
If the recording time is equal to 2 seconds, the screen saver and settings
operate as in "Oscilloscope" mode.
•
If the recording time is over 2 seconds, standby will never be activated.
•
If the recording time is equal to 2 seconds, standby and settings operate as
in "Oscilloscope" mode.
Identical to "Oscilloscope" mode.
When "Advanced" mode is not enabled, certain instrument functions no
longer appear in the menus.
accessible via the "Vert" menu.
math1, math4
• The " " symbol indicates that "Advanced" mode is enabled.
• The stylus can be used to modify this.
• By default, "Advanced" mode is not enabled.
• In "non-advanced" mode, the instrument's configuration is not saved
when it is shut down using the key opposite and the default factory
configuration is loaded at start-up.
ShopAEMC
www. .com 1.877.766.5412
VII - 153