Instrument Configuration (SET-UP)
The SET-UP position gives access to the following options to set user defined
parameters for instrument configuration (NOTE: These parameters can also be
configured in DataView):
No.
1
Erases stored measurements.
2
Enables/disables the buzzer.
3
Enables/disables Auto Power OFF
4
Sets the impedance alarm threshold (W).
5
Sets the voltage alarm threshold (V).
6
Sets the current alarm threshold (I).
7
Sets the date.
8
Sets the time.
9
Selects the Standard or Advanced operating mode.
10
Selects the test frequency for the impedance.
11
Enables/disables the AUTO-HOLD mode.
12
Displays the version number.
13
Not used.
Selecting a Specific Menu
Use the buttons as follows to select a specific menu item:
Button
▲
Move up in the menu tree.
▼
Move down in the menu tree.
►
Select the menu displayed or return to the previous menu.
NOTE: For complete details on the configurable SET-UP menu items, refer to § 4.4 in
the user manual supplied on the USB stick.
Function
Action