Slide Wall Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 6: Slide Wall Assembly
Part 1
A: Place 1 Flange 20 on each side of the End Half Wall making sure that the panel is slat side up. Check to
ensure that flanges are flush at the top and bottom and attach each flange using 3 (S40) #6 x 3/4" Truss Screws
per side. fig.6.1 & 6.3 & 6.4.
B: Taking note of the panel orientation, fit (061) End Half Wall into the bottom of (060) End Panel as shown in
fig.6.2 & 6.3 & 6.4. Attach (061) End Half Wall to (060) End Panel using 2 (S40) #6 x 3/4" Truss Screws per side.
Fig. 6.1
S40
x 3
per side
Fig. 6.2
S40
x 2
per side
Wood Parts
1 x End Panel 1-1/2 x 37 x 92"
060
1 x End Half Wall 1-1/4 x 20-1/4 x 31-7/8"
061
Flange 20
Hardware
10 x #6 x 3/4" Truss Screw
S40
26
Flush
Fig. 6.3
Fig. 6.4
060
061
Other Parts
2 x Flange 20