Nest Ladder Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 4: Nest Ladder Assembly
A: Place (042) Nest Left Access on one side of 3 (043 ) Treads and (041) Nest Right Access on the other side
with the grooves facing in. (fig. 4.1)
B: Fit each (043) Nest Tread into grooves on both ( 041) and (042) Nest Access Rails, make sure the top edge of
the ( 043) Treads are flush to the front of the Access rails. (fig. 4.1 and 4.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2" Wood
Screws per tread. (fig. 4.1)
D: Place (044) Nest Ladder Gap on each access rail so there is a 2-3/8" gap between (044) Ladder Gap and the
top (043) Tread. Attach using 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 4.3)
E: Center a second (044) Ladder Gap between the bottom (043) Nest Tread and the bottom ends of the access
rails and attach using 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 4.3)
Fig. 4.1
043
042
S3
x 6 per
side
Fig. 4.3
Wood Parts
1 x Nest Left Access 1-3/8 x 2-1/2 x 41-1/8"
042
1 x Nest Right Access 1-3/8 x 2-1/2 x 41-1/8"
041
3 x Nest Tread 15/16 x 3-1/4 x 17-1/2"
043
2 x Nest Ladder Gap 5/8 x 3-1/4 x 19"
044
Nest Access Ladder
Nest Access Ladder
041
044
Flush to
top edge
Hardware
12 x #8 x 2-1/2" Wood Screw
S3
8 x #8 x 1-3/8" Wood Screw
S20
24
Fig. 4.2
End View
Flush to
edges
S20 x 2 per side
044
043
Top Edge of
Access Rail