Attach Angle Walls - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 42: Attach Angle Walls
A: Remove the 2 screws on the ladder side of (054) Nest Joist Back. Do not discard. Place (420) Angle Wall A
so that the bottom is over the existing holes and the top angle is towards the roof. Making sure that the board is
straight attach at the bottom using 2 (S4) #8 x 3" Wood Screws in the existing holes and 1 (S11) #8 x 2" Wood
Screw at the top. (Fig. 42.1 & 42.2 & 42.3)
B: Evenly space (421) Angle Wall B, (422) Angle Wall C and (423) Angle Wall D as shown in fig. 42.1 and attach
each board using 3 (S11) #8 x 2" Wood Screws.
Fig. 42.2
remove the two (S3) #8 x 2-1/2"
remove the two 2" WS from the
Wood Screw from the joist
joist and use them to attach the
second rail
Wood Parts
1 x Angle Wall A 1 x 1-1/4 x 38-7/8"
420
1 x Angle Wall B 1 x 1-1/4 x 34-15/16"
421
1 x Angle Wall C 1 x 1-1/4 x 30-31/32"
422
1 x Angle Wall D 1 x 1-1/4 x 27"
423
Fig. 42.1
420
421
422
423
10 x
2 x
Fig. 42.3
420
S4
use longer (S4) #8 x 3" Wood
use longer 3" WS's to mount
Screw to mount the bottom of
the bottom of the first rail
in existing holes.
the first rail in existing holes.
Hardware
#8 x 2" Wood Screw
S11
#8 x 3" Wood Screw
S4
83
S11
054
S11
054
x 3 per
S11
board