Wall Assembly - KidKraft Appleton Play System F24148 Installation And Operating Instructions Manual

Step 17: Wall Assembly
A: On the Swing Side Wall attach 1 (0304) CE Floor Board on each side of the (2782) SW Mount with 4 (S1)
#8 x 1 1/8" Wood Screws per board. Make sure the bottom of the boards are 1" up from the (1774) CE Gap
Boards and there is approximately 3" between each (1771) Post and (0304) CE Floor Board, not exceeding
3-1/4". (fig. 17.1 & 17.2)
B: On the opposite wall attach 1 (0304) CE Floor Board on each side of (2783) Tarp Upright with 4 (S1) #8 x
1-1/8" Wood Screws per board. Make sure the bottom of the boards are 1" up from the (1774) CE Gap Board
and there is approximately 3" between each board, not exceeding 3-1/4". (fig. 17.3 & 17.4)
Fig. 17.1
3"
Fig. 17.4
1771
0304
S1
x 4 per board
1774
Wood Parts
4 x CE Floor Board 1 x 4 x 32-1/2"
0304
1771
2783
3"
1771
0304
1"
16 x
2782
3"
Fig. 17.2
0304
1"
1774
Hardware
#8 x 1-1/8" Wood Screw
S1
31
3"
S1
x 4 per board
0304
Fig. 17.3
1771