Install Bell Support Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 45: Install Bell Support Assembly
Part 1
A: Place (451) Bell Top on top of (452) Bell Support so the angled and back edges are flush then attach with 3
(S20) #8 x 1-3/8" Wood Screws. Repeat by attaching (453) Bell Top Right to top of (452) Bell Support. Rounded
ends of (451) Bell Top and (453) Bell Top RT are at the bottom. (fig. 45.1 & 45.2)
B: Centred above the door on (063) Narrow Front Panel place each Bell Support Assembly so they are tight and
form a peak then attach to (023) Narrow Front Panel with 1 (S3) #8 x 2-1/2" Wood Screw and 1 (S11) #8 x 2"
Wood Screw per assembly. (fig. 45.3)
Fig. 45.1
Top View
Fig. 45.3
063
Wood Parts
1 x Bell Top 5/8 x 3-3/8 x 11-1/4"
451
1 x Bell Top RT 5/8 x 3-3/8 x 11-1/4"
453
2 x Bell Support 1-1/2 x 1-1/2 x 10-5/8"
452
S20
451
S3
S11
S3
Hardware
2 x #8 x 2" Wood Screw
S11
6 x #8 x 1-3/8" Wood Screw
S20
2 x #8 x 2-1/2" Wood Screw
S3
86
Front of assembly
Back of assembly
(next to fort)
Fig. 45.2
Flush
452
453
S20