Attach Wall Supports - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 34: Attach Wall Supports
Note hole orientation for this step.
A: Tight to the floor boards and tight in each corner of the (071) SW Wall Panel attach 2 (341) Wall Supports to
(071) SW Wall Panel with 3 (S3) #8 x 2-1/2" Wood Screws per support. (fig. 34.1)
Fig. 34.1
Tight
Floor
Boards
Wood Parts
2 x Wall Support 1-1/2 x 1-1/2 x 55-1/2"
341
341
S3
6 x
Note hole orientation
071
S3
Hardware
#8 x 2-1/2" Wood Screw
S3
72
341