KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 41

Step 15: Attach Access Ladder/Rockwall Assembly
Part 3
C: Place (151) Support Diagonal so that the angled end is flush to the front edge and to the bottom of (021) Left
Access Rail. The opposite end should be tight against (071) SW Wall Panel. Attach (151) Support Diagonal to
(021) Left Access Rail using pre drill 1 (S7) #12 x 2" Pan Screw ( with flat washer).
D: Center 1 Corner Panel Bracket on each side of (151) Support Diagonal so that each bracket is flat against the
brace and the wall panel as shown in (fig. 15.6). Attach each Corner Panel Bracket using 4 (S0) #8 x 7/8" Truss
Screws.
Fig. 15.5
151
Wood Parts
1 x Support Diagonal 15/16 x 3-1/4 x 23-11/16"
151
20
071
Hardware
1 x #12 x 2" Pan Screw (with flat washer)
S7
8 x #8 x 7/8" Truss Screw
S0
41
Fig. 15.6
Corner
073
Bracket
x 4
S0
151
S7
flat
washer
021
Flush
20
Other Parts
2 x Corner Panel
Bracket