Lower Slide Wall Assembly - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 27: Lower Slide Wall Assembly
Part 1
A: Tight to top of (2189) SL Ground and flush to the outside edges of both (2336) Centre Posts attach (2193)
Siding to both (2336) Centre Posts with 2 (S0) #8 x 7/8" Truss Screws as shown in fig. 27.1.
B: Install 5 more (2193) Siding directly above the first, attaching to both (2336) Centre Posts, making sure there
are no gaps between boards, with 2 (S0) #8 x 7/8" Truss Screws per board. (fig. 27.1)
C: Tight to the top of the last (2193) Siding attach (2190) Wall Board to the (2336) Centre Post with 2 (S2) #8 x
1-1/2" Wood Screws. (fig. 27.1)
D: Place (2428) SL Block flush to the outside edge and top of (2190) Wall Board on the Back Wall side and
attach with 2 (S4) #8 x 3" Wood Screws. Screws go through (2190) Wall Board. (fig. 27.1)
Back Wall
2428
Wood Parts
6 x Siding 3/8 x 3-1/2 x 38-1/2"
2193
1 x Wall Board 1 x 4 x 38-1/2"
2190
1 x SL Block 2 x 4 x 10"
2428
Fig. 27.1
Flush
S4
S0
x 2 per
board
12 x
S0
2 x
S2
2 x
S4
2336
2190
Tight
2189
Hardware
#8 x 7/8" Truss Screw
#8 x 1-1/2" Wood Screw
#8 x 3" Wood Screw
69
2336
2193
Flush
Front Wall
S2