Attach Crow Ladder Grip - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 43: Attach Crow Ladder Grip
A: Place Crow Ladder Grip with one end on the outside of the (041) Nest Right Access and the opposite
end on the outside of the (055) Ladder Side Joist. Pre-drill holes using a 1/8" drill bit then attach using 2
(WL3) ¼ x 1-3/8" Wafer Lags (with flat washer). (Fig. 43.1 & 43.2)
Fig. 43.1
Crow
Ladder
Grip
WL3
Hardware
2 x 1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
84
Fig. 43.2
055
1/4" Flat
Washer
041
Other Parts
1 x Crow Ladder Grip