Assemble Rock Wall - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 60: Assemble Rock Wall
Part 1
A: In the locations shown in fig. 60.1, attach 1 rock to each rock board using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with
lock washer, flat washer and barrel nut) and 1 (S10) #8 x 1" Pan Screw per rock. (fig. 60.1 & 60.2)
The Pan Screw is placed in the hole beneath the Pan Bolt. (fig. 60.2)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 60.2
Fig. 60.1
S10
Hardware
2 x 1/4 x 1-1/4 Pan Bolt
PB2
(1/4" lock washer, 3/16" flat washer & 1/4" barrel nut)
2 x #8 x 1" Pan Screw
S10
PB2
1/4" Lock
Washer
3/16" Flat
Washer
1/4"
Barrel Nut
105
Other Parts
1x Rock A
1x Rock B