Attach Steel Hand Grips To Fort - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 61: Attach Steel Hand Grips to Fort
A: Measure 6" (152mm) from the top of (025) RW/AL Support on (073) Back Wall Panel in the 2 places shown
below, pre-drill with a 1/8" drill bit then attach 2 Steel Hand Grips with 2 (WL3) 1/4 x 1-3/8" Wafer Lag (with flat
washer) per Steel Hand Grip. (fig. 61.1 & 61.2)
Fig. 61.1
Fig. 61.2
073
1/4" Flat
Washer
Steel
Hand
Grip
073
6"
(152mm)
025
1/4" Flat
Washer
WL3
WL3
4 x
Hardware
1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
107
Other Parts
2 x Steel Hand Grip