KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 43

Step 16: Door Panel Assembly
Part 2
C: On the outside of the (161) Door Window Panel attach the second Door Handle at approximately the same
place as the one on the inside. Use 2 (S37) #7 x 5/8" Pan Screws. (fig. 16.3)
D: Attach 2 Door Hinges on the outside of the (161) Door Window Panel on the opposite side from the Door
Handle. Judge spacing based on fig. 16.3. Use 3 (S37) #7 x 5/8" Pan Screws per Hinge.
Note: Hinge stops must be tight to (161) Door Window Panel. (fig. 16.4)
Fig. 16.3
Door
Handle
S37
161
Outside View
Fig. 16.4
Top View
S37
Hardware
8 x #7 x 5/8" Pan Screw
S37
43
1/2"
Hinge Stop
Other Parts
1 x Door Handle
2 x Door Hinge