KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 106

Step 60: Assemble Rock Wall
Part 2
B: In the locations shown in (fig.60.6) loosely attach Kidney Rocks, Rock Johnsons and Crater Rocks with 1 (PB2) ¼
x 1-1/4" Pan Bolt (with lock washer, flat washer and barrel nut) per rock.
C: Hold each rock in place and mark the hole locations for all remaining bolts. Move rocks out of the way and pre-
drill each marked hole location with a 3/8" drill bit.
D: Secure each rock using the required number of (PB2) ¼ x 1-1/4" Pan Bolts (with lock washer, flat washer and
barrel nut) and tighten all hardware. (Fig. 60.3 & 60.4 & 60.5 & 60.6)
Fig. 60.3
PB2
1/4" Flat
1/4" Lock
Washer
Washer
Fig. 60.6
Fig. 60.4
Kidney
Rocks x 2
Rock PB2
Johnsons
x 2
1/4"
Barrel Nut
Hardware
14 x 1/4 x 1-1/4 Pan Bolt
PB2
(1/4" lock washer, 3/16" flat washer & 1/4" barrel nut)
1/4" Lock
Washer
3/16"
Flat
Washer
1/4" Barrel
Nut
106
Fig. 60.5
1/4" Lock
3/16" Flat
Washer
Washer
1/4"
Barrel
Nut
Climbing
Crater
Rock x 2
Other Parts
2 x Rock Johnsons
2 x Kidney Rocks
2 x Climbing Crater Rock
PB2