Install Upper Floorboards - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 29: Install Upper Floorboards
Part 1
A: Place 3 (111) Floor Boards so that they are tight together and front board is flush with the Nest Ladder. Attach
each board using 6 (S20) #8 x 1-3/8" Wood Screws. (fig. 29.1)
B: Place (292) Crowsnest Floor Long Gap so that it's tight to the Crowsnest Posts. Attach using 4 (S20) #8 x 1-3/8"
Wood Screws. (fig. 29.2)
C: Evenly space 2 (291) Crowsnest Floor Longs as shown in (fig. 29.2) and attach using 6 (S20) #8 x 1-3/8" Wood
Screws per board.
Fig. 29.1
Wood Parts
3 x Floor Board 5/8 x 4-1/2 x 35-5/8"
111
1 x Crowsnest Floor Long Gap 5/8 x 3-1/4 x 38-1/4"
292
2 x Crowsnest Floor Long 5/8 x 4-1/2 x 38-1/4"
291
111
Fig. 29.2
50
x 6 per
S20
board
291
292
Hardware
34 x #8 x 1-3/8" Wood Screw
S20
64
x 4 per
S20
board
x 6 per
S20
board