KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 34

Step 11: Floor Assembly
Part 2
C: Measure the distance from the Back Wall to the Front Wall from the inside of the panels to make sure it equals
35-3/4". Maintain this measurement when installing the floor boards. Starting at the Slide Wall place 3 (111) Floor
Boards tight to the previously attached (111) Floor Board, followed by 1 (113) Floor Board then 8 more (111) Floor
Boards. Make sure all boards are equally spaced then attach to (112) Long Floor Joist and each (082) Side Joist
with 6 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 11.5, 11.6 and 11.7)
Fig. 11.5
Back Wall
Slide Wall
14
Wood Parts
11 x Floor Board 5/8 x 4-1/2 x 35-5/8"
111
1 x Floor Board 5/8 x 3-3/8 x 35-5/8"
113
Swing Wall
Front Wall
Hardware
72 x #8 x 1-3/8" Wood Screw
S20
34
Fig. 11.6
Top View
Slide
Wall
111 113
x 6 per board
S20
Fig. 11.7
092
Back Wall
111
Tight