Install Nest Joists - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 25: Install Nest Joists
A: In the lower section of the crowsnest place (251) Short Joist so that it's centered between and flush to the top
of (222) Crowsnest Front and (060) End Panel. Attach (251) Short Joist using 4 (S3) #8 x 2-1/2" Wood Screws.
(Fig. 25.1 & 25.2)
B: At the upper level of the crowsnest, from underneath, place (252) Nest Joist Center so that it fits snuggly into
the notch in the (060) End Panel. Attach (252) Nest Joist Center using 4 (S3) #8 x 2-1/2" Wood Screws. (Fig.
25.1 & 25.2)
C: From underneath the (252) Nest Joist Center and (060) End Panel install 1 (S11) #8 x 2" Wood Screw so that
it's centered under the notches. (Fig. 25.3)
Fig. 25.1
Right View
Wood Parts
1 x Short Joist 1-1/4 x 3 x 12-1/4"
251
1 x Nest Joist Center 1-1/4 x 2-3/8 x 25-3/4"
252
060
252
S3
251
222
S3
Fig. 25.3
Bottom View
Hardware
8 x #8 x 2-1/2" Wood Screw
S3
1 x #8 x 2" Wood Screw
S11
59
Fig. 25.2
Left View
S11