Table of Contents
Advertisement
Step 6: Slide Wall Assembly
A: With a helper, place 1 (9248) Narrow Panel up against the inside edge of (9214) End Slide Panel so that the
edges are flush. The tops and bottoms of the panels should be flush and panels square. Predrill with a 3/16" drill
bit, then fasten (9214) End Slide Panel to (9248) Narrow Panel with 4 (WL5) 1/4 x 2-1/2" Wafer Lags. (fig. 6.1)
B: Repeat Step A to install a second (9248) Narrow Panel on the opposite side. (fig. 6.1)
Wood Parts
1 x
End Slide Panel 1-1/4 x 37 x 86-29/32"
9214
2 x
Narrow Panel 1-1/4 x 21-1/2 x 86-21/32"
9248
Fig. 6.1
WL5
8 x
9248
9214
Hardware
1/4 x 2-1/2" Wafer Lag
WL5
32
WL5
Advertisement
Table of Contents
