Rockwall Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 3: Rockwall Assembly
A: Place (031) Access Board flush to the top of the Access Ladder/Rockwall Assembly and (030) Access Rock
Bottom at the bottom of the assembly as shown in fig. 3.1. Then place (032) Board Rock A's, (033) Board Rock
B's and (030) Access Board as they are shown in fig. 3.1. Do not screw boards down yet. Rock holes are to be
staggered so they do not form a straight line and are at the top of the boards. Note: Rock Boards are to be flush
to (021) Left Access Rail and pilot holes are centred over (024) Rock Rail. (fig. 3.1)
B: Make sure all boards are tight together and the assembly is square, then attach all boards except for (031)
Access Board using 4 (S20) #8 x 1-3/8" Wood Screws per board. (031) Access Board to be attached in Step15
Part 2, keep aside until needed. (fig. 3.1)
Fig. 3.1
031
Flush
IMPORTANT!
Follow hole
pattern
Wood Parts
2 x Access Rock Bottom 5/8 x 5-1/4 x 22-1/8"
030
1 x Access Board 5/8 x 4-1/4 x 22-1/8"
031
3 x Board Rock A 5/8 x 5-1/4 x 22-1/8"
032
5 x Board Rock B 5/8 x 5-1/4 x 22-1/8"
033
Do not attach yet,
put aside until
Step 15
032
033
40 x
033
032
033
032
Hardware
#8 x 1-3/8" Wood Screw
S20
23
x 4 per
S20
board
033
033
030
021
024
030
020