Step 26: Attach Crowsnest Walls
Part 2
B: In the lower front of the crowsnest place 1 (262) Crowsnest Front Spacer on each side of the assembly so
that they are flush with the (222) Crowsnest Front and the (221) Crowsnest Posts. Attach each Crowsnest Front
Spacer through the pre-drilled holes on the (221) Crowsnest Posts using 3 (S4) #8 x 3" Wood Screws per side.
(Fig. 26.1 & 26.2).
Fig. 26.2
Wood Parts
2 x
Crowsnest Front Spacer 1-1/4 x 5-1/32 x 26-15/16"
262
Fig. 26.1
221
262
222
x 3 per
S4
side
Hardware
6 x
#8 x 3" Wood Screw
S4
61