Chalk Wall Assembly - KidKraft F24145 Installation And Operating Instructions Manual

Step 13: Chalk Wall Assembly
A: Place the Chalk Wall Tarp in between each (0359) Front Divider and (1758) Top Back. Make sure tarp is taut
and then attach to (1758) Top Back with 3 (S5) #8 x 1/2" Wood Screws (with #8 flat washer). Tighten the bolts in
both (0359) Front Dividers. (fig. 13.1)
B: Recheck that tarp is taut and then attach Chalk Wall Tarp to both (0359) Front Dividers from the inside of the
assembly with 2 (S5) #8 x 1/2" Pan Screws (with #8 flat washer) per board as shown in fig. 13.2.
C: 3" above (1762) Floor Back attach (1754) Lower Back Wall to each (0359) Front Divider with 4 (S1) #8 x 1-1/8"
Wood Screws. (fig. 13.3)
D: Attach Chalk Wall Tarp to (1754) Lower Back Wall with 3 (S5) #8 x 1/2" Wood Screws (with #8 flat washer).
(fig. 13.4)
Fig. 13.1
0359
Fig. 13.4
Wood Parts
1 x Lower Back Wall 1 x 4 x 31-1/2"
1754
S5
1758
0359
S5
10 x
S5
4 x
S1
0359
S5
1754
0359
1762
Hardware
#8 x 1/2 Pan Screw (with #8 flat washer)
#8 x 1-1/8 Wood Screw
27
Fig. 13.2
S1
Fig. 13.3
3"
0359
1754
Other Parts
1 x Chalk Wall Tarp
0359
S5