Attach Slide Wall Inserts - KidKraft F24930 Installation And Operating Instructions Manual

Step 28: Attach Slide Wall Inserts
A: In the narrow opening of (2622) End Panel Assembly (Upper Jamb should already be installed), place the
MOD Side Lite from inside the assembly then attach to the panel and (2602) Upper Jamb with 14 (S0) #8 x 7/8"
Truss Screws. (fig. 28.1 and 28.2)
B: In the wider opening of (2622) End Panel Assembly, tight to the bottom board place (8935) Lower SL Insert
from inside the assembly then attach to the panel and (2602) Upper Jamb with 4 (S0) #8 x 7/8" Truss Screws .
(fig. 28.1 and 28.2)
Fig. 28.1
Inside View
MOD
Side Lite
Tight
Wood Parts
1 x Lower SL Insert 1.36 x 8-1/8 x 26-1/4"
8935
SIZE DWG. NO.
A
2622
2602
8935
S0
x 14
18 x
REV.
TNR3 Prep
MOD Side Lite
Hardware
#8 x 7/8" Truss Screw
S0
64
TNR 3
Fig. 28.2
Inside View
2602
8935
S0
Other Parts
1 x MOD Side Lite
2622