Attach Swing Top Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 35: Attach Swing Top Assembly
A: Tight to the top of (071) SW Wall Panel and flush to the outside of each (341) Wall Support place Swing Top
Assembly then attach (341) Wall Supports to (332) Swing Side Uprights with 2 (S3) #8 x 2-1/2" Wood Screws per
support. (fig. 35.1)
Flush
Swing Top Assembly
Fig. 35.1
Flush
332
S3
S3
341
332
071
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
73