Attach Transom Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 36: Attach Transom Assembly
Part 1
A: Place 1 Transom Assembly on both (072) Front Wall Panel and (073) Back Wall Panel so they are tight
to (331) Swing Top and (341) Wall Supports. From the outside attach each Transom Assembly to (341) Wall
Supports with 2 (S3) #8 x 2-1/2" Wood Screws per assembly. (fig. 36.1)
B: From the inside attach (341) Wall Supports to each Transom Assembly and both the (072) Front Wall Panel
and (073) Back Wall Panel with 4 (S3) #8 x 2-1/2" Wood Screws per support. (fig. 36.2)
C: From the inside attach each (325) Wall Tie to both (072) Front Wall Panel and (073) Back Wall Panel with 2
(S11) #8 x 2" Wood Screws per board. (fig. 36.2)
Fig. 36.1
Transom
Assembly
073
341
331
S3
x 2 per Transom
Assembly
072
12 x
S3
4 x
S11
Fig. 36.2
Inside View
341
S3
x 4 per
wall
support
Hardware
#8 x 2-1/2" Wood Screw
#8 x 2" Wood Screw
74
325
Transom
Assembly
x 2 per
S11
board
072