KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 68

Step 31: Large Roof Assembly
Part 2
C: Place 1 Roof Support Assembly against one side of the roof assembly so the peaks meet and the ends of the
roof supports are flush with the ends of the roof panels. Attach with 8 (S11) #8 x 2" Wood Screws. (fig. 31.3)
D: Attach the second Roof Support Assembly on the opposite side, making sure that the peaks meet and the
ends are flush. Attach using 8 (S11) #8 x 2" Wood Screws. (fig. 31.3)
Fig. 31.3
Roof Support
Assembly
Flush
312
Flush
Roof Support
Assembly
16 x
S11
S11
S11
Hardware
#8 x 2" Wood Screw
68
Flush
Flush