Cafe Wall Assembly - KidKraft NEWPORT PLAYSET F29015 Installation And Operating Instructions Manual

Step 5: Cafe Wall Assembly
A: Attach (1914) Cafe Ground with 4 (H2) ¼ x 2" Hex Bolts (with lock washer, flat washer and t-nut); (1760)
Floor using 2 (H2) ¼ x 2" Hex Bolts (with lock washer, flat washer and t-nut) in the bottom holes, noticing hole
locations; (1923) Side Top with 2 (H2) ¼ x 2" Hex Bolts (with lock washer, flat washer and t-nut) and (1981) Top
Side with 2 (H2) ¼ x 2" Hex Bolts (with lock washer, flat washer and t-nut) to 2 (1500) Posts as shown in fig. 5.1,
5.2 and 5.3.
Note: Pre-drill all holes using a 1/8" drill bit before installing the lag screws.
B: Make sure assembly is square and then fasten (1760) Floor to (1500) Posts in the top holes using 2 (LS1) ¼
x 1-1/2" Lag Screws (with flat washer). (fig. 5.1 and 5.3)
Fig. 5.1
H2
1923
LS1
H2
1760
1500
H2
Wood Parts
1 x Cafe Ground 1 x 5 x 41-1/2"
1914
2 x Post 2 x 4 x 83"
1500
1 x Floor 1 x 6 x 26-7/8"
1760
1 x Side Top 1 x 4 x 26-7/8"
1923
1 x Top Side 1 x 4 x 36"
1981
1981
Notice the
hole
location
1914
10 x
2 x
1760
LS1
H2
H2
1914
1500
1/4" Lock
Washer
H2
Hardware
H2 1/4 x 2" Hex Bolts (1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
1/4" x 1-1/2" Lag Screws (1/4" flat washer)
LS1
18
Fig. 5.2
1/4" Flat
Washer
1/4" Lock
Washer
Fig. 5.3
1/4" Flat
Washer
europecustomerservice@kidkraft.com
1500
1/4"
T-Nut
1500
1/4"
T-Nut