Attach Nest Ladder - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 28: Attach Nest Ladder
A: Place Nest Ladder (built in Step 4) in the second level of the Clubhouse so that the top of the ladder is leaning
flat against the (051) Nest Joist Mid and flush with the (055) Ladder Side Joist. (Fig. 28.1)
B: Place 1 (111) Floorboard so that it's flush to (051) Nest Joist Mid. This board is used as a guide only, do not
attach.
C: Check to ensure that the Nest Ladder is flush with the top of the (111) Floor Board. Pre-drill using a 1/8" drill bit
and attach Nest Ladder using 1 (WL5) 1/4 x 2-1/2" Wafer Lag (with flat washer) per side. (Fig. 28.1 & 28.2)
Fig. 28.2
051
only place floor boards to set ladder flush to top
Fig. 28.1
111
055
041
Flat
Washer
only place floor boards to set ladder flush to top
49
WL5
Hardware
2 x Wafer Lag 1/4 x 2-1/2"(with flat washer)
WL5
63
only place
floor boards
to set ladder
flush to top
051
055