Attach Wall Tops - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 12: Attach Wall Tops
A: In the opening of (071) SW Wall Panel, from the inside, attach (121) SW Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 12.1 and 12.2.
B: In the opening of (073) Wall Back Panel, from the inside, attach (122) Half Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 12.1 and 12.2.
C: In the opening of (062) Back Narrow Panel, from the inside, attach (123) Small Half Wall Top tight to the
corner of the panel with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 12.2.
D: At the top of each slat, flush to the wall tops, attach 1 Corner Bracket using 3 (S37) #7 x 5/8" Pan Screws per
bracket. Note: Small Half Wall Top does not require brackets. (fig. 12.1 and 12.3)
Fig. 12.3
View from underneath
Corner
Bracket
Slat
Fig. 12.1
062
Slide Wall
Wood Parts
1 x SW Wall Top 15/16 x 2-3/8 x 33-1/2"
121
1 x Half Wall Top 15/16 x 2-3/8 x 39"
122
1 x Small Half Wall Top 15/16 x 2-3/8 x 19"
123
x 3 per
S37
bracket
123
Fig. 12.2
Inside View
122
122
073
Slat
Hardware
15
6 x #8 x 2" Wood Screw
S11
9 x #7 x 5/8" Pan Screw
S37
15
15
35
Tight
S11
121
Swing Wall
3 x Corner Bracket
121
071
Slat
Other Parts