KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual page 22

Step 2: Access Ladder / Rockwall Assembly
Part 2
D: Place (023) Ladder Gap on each access rail so there is a 2-3/8" gap between (023) Ladder Gap and the top
(022) Tread. Attach using 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 2.3)
E: Place (024) Rock Rail on the ground next to (020) Right Access so it matches the orientation of the two access
rails as shown in fig. 2.3. Attach (025) RW-AL Support flush to the top of Access Ladder assembly and (024) Rock
Rail using 3 (S20) #8 x 1-3/8" Wood Screws in the top holes and 3 (S11) #8 x 2" Wood Screws in the bottom holes.
Pilot holes in (025) RW-AL Support should be centred over the rails. (fig. 2.3)
Fig. 2.3
S20
x 3 in top holes
025
Flush
Wood Parts
1 x Ladder Gap 5/8 x 3-1/4 x 21"
023
1 x Rock Rail 1-3/8 x 2-1/2 x 57-53/64"
024
1 x RW-AL Support 5/8 x 3-1/4 x 41-3/4"
025
S11 x 3 in bottom holes
023
S20
x 4
022
024
Hardware
3 x #8 x 2" Wood Screw
S11
7 x #8 x 1-3/8" Wood Screw
S20
22
021
020