Final Swing Post Assembly - KidKraft Cedar Summit COPPER RIDGE PLAYSET Installation And Operating Instructions Manual

Step 20: Final Swing Post Assembly
Pre-drill all holes using a 3/16" drill bit before installing the lag screws.
Note: Tighten all bolts from Step 18 series before installing lag screws.
A: Attach 1 (LS9) 5/16 x 4-3/4" Lag Screw (with flat washer) into each (183) SW Post, as shown in fig. 20.1.
B: Attach 1 (LS9) 5/16 x 4-3/4" Lag Screw (with flat washer) into remaining hole of the Heavy C-Bracket into
(171) Engineered SW Beam. (fig. 20.1)
Fig. 20.1
LS9
5/16" Flat
Washer
5/16" Flat
171
Washer
Heavy C-Bracket
183
Hardware
3 x 5/16 x 4-3/4" Lag Screw
LS9
(5/16" flat washer)
52
LS9