Radius Servers Enforcing Vlan Access Control; Configuring Radius Profiles; Adding Or Modifying A Radius Server Profile - Proxim AP-4000 User Manual

Orinoco ap-4000 access point user guide
Hide thumbs Also See for AP-4000:
Table of Contents

Advertisement

Performing Advanced Configuration
Radius Profiles
Authentication servers for each VLAN shall be configured as part of the configuration options for that VLAN. RADIUS profiles are independent
of VLANs. The user can define any profile to be the default and associate all VLANs to that profile. Four profiles are created by default, "MAC
Authentication", "EAP Authentication", Accounting", and "Management".

RADIUS Servers Enforcing VLAN Access Control

A RADIUS server can be used to enforce VLAN access control in two ways:
Authorize the SSID the client uses to connect to the AP. The SSID determines the VLAN that the client gets assigned to.
Assigning the user to a VLAN by specifying the VLAN membership information of the user.

Configuring Radius Profiles

A RADIUS server Profile consists of a Primary and a Secondary RADIUS server that get assigned to act as either MAC Authentication
servers, 802.1x/EAP Authentication servers, or Accounting Servers in the VLAN Configuration. Refer to
The RADIUS Profiles Sub-tab allows you to add new RADIUS profiles or modify or delete existing profiles.
Figure 4-33 RADIUS Server Profiles

Adding or Modifying a RADIUS Server Profile

Perform the following procedure to add a RADIUS server profile and to configure its parameters.
1. Click Add to create a new profile. To Modify an existing profile, select the profile and click Edit. To delete an existing profile, select the
profile and click Delete. You cannot delete a RADIUS server profile if you are using it in an SSID. Also, the four default RADIUS server
profiles cannot be deleted (indices 1.1, 1.2, 2.1, 2.2, 3.1, 3.2, and 4.1, 4.2.)
2. Configure the following parameters for the RADIUS Server profile (refer to
NOTE
This page configures only the Primary RADIUS Server associated with the profile. After configuring these parameters, save them by
clicking OK. Then, to configure the Secondary RADIUS Server, edit the profile from the main page.
Configuring Security
Figure
4-34):
AP-4000 User Guide
Profiles.
86

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orinoco ap-4000

Table of Contents