Data Types; View Data In Specific Tasks, Modules, Or Routines - ABB OmniCore Operating Manual

6.4 Data types

6.4.1 View data in specific tasks, modules, or routines

Viewing data in specific tasks, modules, or routines
It is possible to view selections of data types by selecting a specific scope.
Use the following procedure to view data instances in specific modules or routines:
Operating manual - OmniCore
3HAC065036-001 Revision: D
1 On the start screen, tap Code, and then select RAPID Data from the menu.
2 Select the required scope. The following options are available:
• Built-In Data Only: Displays all the data types used by the specific
system.
• Current Execution: Displays all the data types used in the current
execution.
The following sub options are available. To access the sub options tap
on Change.
- Task: Displays all the data types used by a specific task.
- Module: Displays all the data types used by a specific module.
- Routine: Displays all the data types used by a specific routine.
3 Select the required view. The following options are available:
• Only used types: Displays only the used data types.
• All data types: Displays all the data types.
4 Tap on a data type to view its details.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.4.1 View data in specific tasks, modules, or routines
101