Restore The System - ABB OmniCore Operating Manual

10.5 Restore the system

When do I need this?
We recommend performing a restore:
During the restore, all system parameters are replaced and all the modules from
the backup directory are loaded.
The Home directory is copied back to the new system's HOME directory during
the restart.
Procedure
Operating manual - OmniCore
3HAC065036-001 Revision: J
10 Install, update, restart, and other configuration
• If you suspect that the program file is corrupt.
• If any changes made to the instructions and/or parameters settings did not
prove successful, and you want to return to the previous settings.
1 On the start screen, tap Settings, and then Backup & Recovery.
2 On the Backup & Recovery menu, tap Restore.
The Restore page is displayed.
xx1900000153
3 Browse for the location where the backup is located and select the backup
file.
4 If required select the Safety Settings options.
5 Tap Restore.
The restore is performed, and the system is restarted.
© Copyright 2019-2021 ABB. All rights reserved.
10.5 Restore the system
253