Figure 55 Water Level Setting - Thermo Scientific Heracell 150i GP Operating Instructions Manual

Chapter 7 Handling and Control (iCanTM Touchscreen Controller)
1. To toggle between two options [1]:
− Press the
key [4].
+
or
− Press the
key [2].
-
2. To accept and save the change:
− Press the
ENTER
− The system returns to the Options menu.
7.14.3.4. Switching the water level sensor on/off:
For incubation operation with ambient humidity or if the auto-start routine is to be run dry (without
water), the water level sensor can be switched off.
This prevents alarm messages for the water level sensor by the device-integral monitoring system
from being issued.
Figure 55.
Water level setting
1. To toggle between two states [1]:
− Press the
key [4].
+
or
− Press the
key [2].
-
2. To accept and save the change:
− Press the
ENTER
− The system returns to the Options menu.
Heracell 150i / 240i GP 50159351_B_06-2020
key [3].
key [3].
105
Thermo Scientific