Keys - Thermo Scientific SL 16 Instruction Manual

3
Control Panel
Control Panel
Control Panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located on
the back of the device). All parameters can be selected and changed during operation.
Program selection keys
Speed / RCF Value

Keys

The keys allow user intervention for controlling the operating mode as follows:
Key
3-2 SL 16 / 16R
Speed / RCF Value
running time
Changing the display mode
Prewarming or Precooling
Start
Stop
Open lid
Pulse
Change Value
Snow Symbol
Changing the
display mode
Acceleration curve
Braking curve Bucket selection
Temperature
Display contents
Normal start of the centrifuge
End run manually
Automatic release (possible only when device is switched on). Emergency
release (see "Mechanical Emergency Door Release"
By pressing the PULSE key the centrifuge starts immediately and accelerates
up to the end speed. Releasing the key initiates a stopping process at the
highest braking curves.
Use the arrow keys in order to modify the displayed value
Press the snow symbol key for prewarming or precooling the centrifuge.
Use the Change key to change the display mode. (Speed / RCF Value)
PULSE key
Bucket key
START key
on page
OPEN key
STOP key
7-2)
Thermo Scientific