Network Topology File Formats; Text Version; Xml Version; Fig. 51: Web - Example Text File - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
3.5.8

Network Topology File Formats

Use the following formats to create Network Topology.

Text Version

# Network Topology List
freq.0=1000
channelsize.0=3.5
latitude.0=90
longitude.0=180
antennaheight.0=120
antennagain.0=18.5
antennabeamwidth.0=50
antennaAzimuth.0=360
antennatilt.0=0
bsid.0=0x135ACE
systemName.0="Sector controller L1P3W
Notes:
1. Lines started with '#' are comments.
2. Enter only one parameter per line.
3. Parameter settings use the following format: <parameter_name>.<reference #> = <value>.
4. The parameter name is case insensitive.
5. The reference # may be 0 to 19.
6. Values containing spaces must be double quoted:
(e.g., systemName.1="Sector controller L1P3W"

XML Version

<?xml version="1.0" encoding="ISO-8859-1" standalone="yes"?>
<!-- Sample Network Topologylist file
-->
<!DOCTYPE table [
<!ELEMENT table (SC*)>
<!ELEMENT SC (freq, channelSize, latitude, longitude, antenna, systemName?)>
<!ELEMENT freq (#PCDATA)>
<!ELEMENT channelSize (#PCDATA)>
<!ELEMENT latitude (#PCDATA)>
<!ELEMENT longitude (#PCDATA)>
<!ELEMENT antenna (height, gain, beamwidth?, tilt?, azimuth)>
<!ELEMENT height (#PCDATA)>
<!ELEMENT gain (#PCDATA)>
<!ELEMENT beamwidth (#PCDATA)>
<!ELEMENT tilt (#PCDATA)>
<!ELEMENT azimuth (#PCDATA)>
<!ELEMENT bsId (#PCDATA)>
<!ELEMENT systemName (#PCDATA)>
70-00158-03-00
USER MANUAL

Fig. 51: Web - Example Text File

<!ATTLIST table version_major CDATA #REQUIRED>
<!ATTLIST table version_minor CDATA #REQUIRED>
Proprietary Redline Communications © 2015 Page 89 of 254 April 17, 2015