8.7 Operation In 4900 - 5800 Mhz Bands; Deployment In Brazil; Deployment In The United States; Fcc Notices - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY

8.7 Operation in 4900 - 5800 MHz Bands

Operation of the wireless system requires a software 'key' that is available exclusively
from Redline. When required by the regional regulatory statutes where the wireless
system is being deployed, the software key restricts device operation to the FCC/IC
4940-4990 MHz, 5250-5350 MHz, 5470-5725 MHz, or 5725-5850 MHz band. The
professional installer and operator can not modify or otherwise circumvent these
operational restrictions.
The module supports operation with 2x2 MIMO antenna systems with two transmit
chains and two receive chains. The module must be used only with certified antennas
and using the channel size and output power level specified by the FCC/IC regulations.
This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.
Manufacturer
Redline
Redline
L-Com
8.7.1

Deployment in Brazil

Regarding the operation on range of 5470 MHz to 5725 MHz, the average output power
of the equipment must be adjusted to the maximum limit of -5 dBm for the antenna gain
maximum of 25 dBi.
8.7.2

Deployment in the United States

FCC Notices

The following notices about deployment in the USA are included in training and
documentation provided to professional installers and operators of the final product:
The final product must be professionally installed.
1.
WARNING -- FCC RF Exposure Warnings
2.
To satisfy FCC RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:

Table 76: 4900-5875 MHz Recommended Safe Distances for USA

Frequency (MHz)
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
FCC Information to Users @ FCC 15.105:
3.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
70-00158-03-00
USER MANUAL

Table 75: 4900-5875 MHz Approved Antennas

Part #
A3FT3204LTPD
30-00328-00
HG5158DP-10U
Deployment
4900
5300
5400
5800
Proprietary Redline Communications © 2015
Gain (dBi)
32
19
10
Separation Distance
PMP 260 cm (103") or more
PMP 20 cm (7.8") or more
PMP 20 cm (7.8") or more
PMP 20 cm (7.8") or more
Page
Frequency Range
4900-5875 MHz
4900-5875 MHz
5100-5800 MHz
199 of 254 April 17, 2015