Long Reset - Restore Default Passwords Only - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
When login is successful, the admin and user accounts are reset to the factory
6.
default usernames and all other user accounts are deleted. No other parameters are
changed. All standard configuration commands are now available to the operator. If
the IP was unknown, this can be now displayed and/or changed. Modify settings as
required and reboot the RDL-3000 to exit from long reset mode.
Web
If using a web browser to access the RDL-3000, prepare the PC for by opening a Web
browser on the PC and typing the following URL into the address bar:
http://192.168.25.2
Follow the steps for 'Long Reset Using Telnet', substituting the Web browser for Telnet.

Long Reset - Restore Default Passwords Only

Use this procedure if the unit IP address is known and only the default usernames and
passwords are to be restored. All other configuration settings are preserved.
Telnet
Perform a long reset and use Telnet to login to the RDL-3000 using the default IP
1.
address (192.168.25.2) and the default login credentials (admin/admin).
Enter the command reboot to restart the unit. Do not enter any other commands.
2.
Login to the RDL-3000 using the user-configured IP address and the default
3.
administrator username (admin) and password (admin).
Web
Perform a long reset and use a Web browser to login to the RDL-3000 using the
1.
default IP address (192.168.25.2), and the default administrator username (admin)
and password (admin).
Click Configuration->System to display the System Configuration screen.
2.
Click Utilities->Reboot to reboot the RDL-3000.
3.
Login to the RDL-3000 using the user-configured IP address and the default
4.
administrator username and password (admin/admin).
70-00158-03-00
USER MANUAL
Proprietary Redline Communications © 2015 Page 152 of 254 April 17, 2015