Snmp V3: Trap Destination Settings; Fig. 37: Web - Snmp V2: Trap Configuration Screen; Fig. 38: Web - Snmp V3: Trap Destinations Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY USER MANUAL
SNMP v2: Edit Trap Destinations
The following screen is displayed when SNMP v2 is selected. Click Change or Add in
the SNMP Trap Destinations section of the screen to modify the list of trap listeners. The
following popup dialog is displayed:

Fig. 37: Web - SNMP v2: Trap Configuration Screen

Index: Display the unique reference number for this entry. This value is required when
using the CLI interface to modify SNMP trap settings.
IP Address: Enter the IP address (IPv4) associated with this SNMP trap alarm. If this
field is set to '0.0.0.0' when Change Trap is clicked, this entry is deleted.
Port: Enter the destination port address associated with this SNMP trap alarm.
Community Name: Enter the community name for this trap destination.
Change Trap: Click to accept changes and close this dialog.
Delete Trap: Click to remove this trap.

SNMP v3: Trap Destination Settings

This section displays the SNMP trap destination settings. SNMP trap messages inform
network management devices of status changes on the RDL-3000. This security feature
must be enabled by the options key
( ).
Note: When using SNMPv3 the context name for all RDL-3000 family systems is:
contextPMP
When SNMP v3 is enabled, RDL-3000 user accounts are used to control SNMP access
(see Users Management).

Fig. 38: Web - SNMP v3: Trap Destinations Screen

IP Address (IPv4): IP address of this trap listener. A copy of each SNMP trap message
is transmitted to this address.
Port: Destination port address of this trap listener.
User Name: User account associated with this trap listener.
Change: Click Change to modify the existing SNMP community string.
Add: Click Change to create a new SNMP user name (max. 8 strings).
70-00158-03-00 Proprietary Redline Communications © 2015 Page 70 of 254 April 17, 2015