Network Topology File Format; Table 13: Web - Configure - Network Topology List Fields; Fig. 50: Web - Sector Controller Identification (Scid) - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY

Network Topology File Format

The file may be in plain text of XML format and contain information for up to 20 sector
controllers. The network topology list must use the format specified in this document.
The following table describes the fields in the network topologylist that describe a sector
controller. The '.n' designation (0-19) uniquely identifies up to 20 sector controllers.
freq.n
channelsize.n
latitude.n
longitude.n
antennaheight.n
antennagain.n
antennabeamwidth.n
antennaAzimuth.n
antennatilt.n
bsid.n
systemName.n
The BSID (SCID) field is a unique identifier for a sector controller. This value is available
on the General Information page of the sector controller Web interface.
70-00158-03-00
USER MANUAL

Table 13: Web - Configure - Network Topology List Fields

RF frequency in-use (MHz).
Channel size (MHz).
Positional lattitude in degrees decimal.
Positional longitue in degrees (decimal).
Antenna height in meters.
Antenna gain in dBi.
Antenna beamwith in degrees.
Antenna orientation in degrees (decimal).
Antenna elevation tilt in degrees.
Sector controller identification number (BSID).
Name assigned to this sector controller

Fig. 50: Web - Sector controller Identification (SCID)

Proprietary Redline Communications © 2015 Page 88 of 254 April 17, 2015