Snmptrap - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
name
Enter the SNMP community name.
rights
Specify the rights for this community string. Where.
clearall (no parameters)
Delete all SNMP parameters.
default <idx>
Set all SNMP parameters to factory default settings.
del <idx>
Delete the specified community entry.
print
List all SNMP communities and associated permissions.

snmptrap

Use the snmptrap command to configure the SNMP trap message reporting.
snmptrap <off | on> <add> <change> <clearall> <del> <print>
add <ipaddr> <port> <identity>
Create up to eight SNMP traps. The index value is assigned automatically.
ipaddr
port
identity
change <idx> [-p <port>] [-i <ip_add>] [-c <community>] [-u username]
Modify the specified SNMP setting.
idx
-i <ip_add>]
-p <port>]
-c <community> Enter associated SNMP community string (SNMP V1 or v2).
-u <username>
clearall
Delete all SNMP parameters.
del <idx>
Delete the specified SNMP trap.
idx
linkupdown
Trap indicates when the wireless Link is lost and recovered.
Off - Enable link up/down trap.
70-00158-03-00
0: Deny read and write permission (enter zero).
r: Grant read access permission only.
w: Grant write access permission only.
rw: Grant read and write access permission.
idx Specify entry to be default (use 'print' to display IDs).
idx Specify single entry to be deleted (use 'print' to display IDs).
Enter destination IP address
Enter destination port address.
v2: Enter associated SNMP community string.
v3: Enter account username for authorization.
Index of the SNMP trap (use 'print' command to display ids).
Enter destination IP address.
Enter destination port address.
Enter account username for authorization (SNMP v3 only).
Index of the SNMP trap to be deleted (use 'print' command to display ids).
Proprietary Redline Communications © 2015
USER MANUAL
Page 142 of 254 April 17, 2015