Script; Set - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
save <config> <defaultconfig> <idtable> <snmp>
config
Save Ethernet, wireless, and user configuration settings.
defaultconfig
Overwrite parameters with the factory default settings. The following settings are not
affected: system name, location, details and contact, frequency list, SNMP
configuration, and idtable.
idtable
Save current idtable settings (e.g., Service Group, Service, or Link).
snmp
Save current SNMP settings.

script

Use the script command to save a file containing a string of CLI commands that can be
used to restore the current active configuration of the RDL-3000. The command uses a
TFTP server and the script file is saved in the TFTP default directory. The filename may
be any name and extension valid for the TFTP server platform. Use the
command to restore a saved configuration.
script <server> <filename>
server - TFTP server IP address
filename - Script file name
IdPwdClearText - Specify if ID template password to be sent in clear text (default).
Note: User account groups, usernames and passwords are not saved by the script
command. Accounts must be created manually by a user using Telnet or a Web
browser. The 'user' set of commands are interactive and can not be automated.

set

Use the set command to view and/or change a parameter. Use the apply command to
activate changes made using the set command. Use the 'save' command to copy the
changes to non volatile RAM.
set <parameter>
activekey <actkey>
Select the active options key (position 1 or 2). Also see ' set optionskey'.
actkey - Optionally enter a new key value.
adaptmod <id><mode>
Enable or disable adaptive modulation for the link
id
mode Enable or disable adaptive modulation for the link.
antbeam <0-n>
Set the operating mode for the RAS-Elite antenna.
0:
1-n:
70-00158-03-00
Specify a unique ID for this connection.
off - Disable
on - Enable
RAS-Elite antenna automatically scans 360° in azimuth to locate signals
from Redline sector controllers. Refer to the 'lautoscan'.
Manually set the RAS-Elite antenna beam to the specified sector. The
center of sector '1' is marked on the antenna. The remaining sectors are
arranged sequentially counter-clockwise around the antenna.
Proprietary Redline Communications © 2015
USER MANUAL
'load
Page 127 of 254
script'
April 17, 2015