Fig. 23: Web - Gps Map Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
GPS Position: Display the position coordinates of the sector controller. The GPS
coordinates format is in degrees, minutes and seconds (to four decimal places) with
North / South or East / West. Click on the blue GPS position text when displayed (right of
screen) to launch the pop-up map screen.
Redundancy Status: (SC only) Status of the redundancy feature.
Refer to 1+1 Device Redundancy Configuration (SC
visible only when enabled by the options key (
Off - Redundancy feature is disabled on this unit.
Primary Active - This unit is Primary and is controlling the sector (RF active).
Primary Inactive - This unit is Primary and is in standby mode (RF disabled).
Backup Active - This unit is Backup and is controlling the sector (RF active).
Backup Inactive - This unit is Backup and is in standby mode (RF disabled).
Redundancy Peer Status: (SC only) Status of the redundancy feature on the peer.
to 1+1 Device Redundancy Configuration (SC
when enabled by the options key
Off - This unit can not synchronize status with peer. Possible reasons include:
1.
2.
3.
Primary Active - The peer is Primary and is controlling the sector (RF active).
Primary Inactive - The peer is Primary and is in standby mode (RF disabled).
Backup Active - The peer is Backup and is controlling the sector (RF active).
Backup Inactive - The peer is Backup and is in standby mode (RF disabled).
Noise Level 1: (SC only) Noise floor measurement for RF port 1.
Noise Level 2: (SC only) Noise floor measurement for RF port 2.
70-00158-03-00
USER MANUAL

Fig. 23: Web - GPS MAP Screen

(
Peer redundancy is disabled or is not available (options key)
Peer IP address is not correct (wireless configuration)
No IP connectivity to peer (cables or routing)
Proprietary Redline Communications © 2015
only). The redundancy fields are
).
The redundancy fields are visible only
only).
).
Page 49 of 254 April 17, 2015
Refer