Service Group Configuration; Fig. 60: Web - Service Group Configuration Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY

Service Group Configuration

Use this screen to create new Service Groups or view/modify existing Service Groups.
Service Groups
Click
and click on the Service Group name (Name column) to display this screen.
Basic Service Group Configuration
Service Group Name: Enter a unique name to identify this Service group. This identifier
is displayed on configuration and statistics screens. The name may contain up to fifteen
(15) alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Service Group ID: (Read only) A unique identifier assigned to each Service Group (128
to 159). This value is required when using the CLI interface to modify settings.
VLAN Tagging: Select the classification mode for this Service Group.
Tagged: Select tagged to associate a unique VID with this Group.
Pass-through: Classify all packets that do not have a VLAN ID, or where the
outermost VLAN ID tag does not match the VLAN ID for any tagged Group. Ethernet
ingress port are discarded.
802.1q VLAN ID [0-4095]: Enter the VID associated with this Group definition.
This field is active only when 'Tagged' is selected in the Group Tagging Mode field.
Default 802.1p Priority: Enter the default 802.1p priority setting.
The default priority value is applied when a Service Group set to Tagged mode (add
VLAN tag) receives a packet with no priority information.
Advanced Service Group Configuration
SC Ethernet Port Enable: Controls the function of the sector controller Ethernet port for
group multicast traffic.
70-00158-03-00
USER MANUAL
in the main menu, locate the desired Service Group in the table,

Fig. 60: Web - Service Group Configuration Screen

Proprietary Redline Communications © 2015 Page 100 of 254 April 17, 2015