Restore Factory Configuration - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY

Restore Factory Configuration

Use the following steps to restore the RDL-3000 to the factory configuration
Telnet
Perform a long reset and use Telnet to login to the RDL-3000 using the default IP
1.
address (192.168.25.2), and the default administrator username (admin) and
password (admin).
Enter the command save defaultconfig. The RDL-3000 will automatically reboot.
2.
Wait for the reboot to complete (10 seconds) and login to the RDL-3000 using the
3.
default IP address (192.168.25.2) and the default administrator username (admin)
and password (admin).
Web
Perform a long reset and use a Web browser to login to the RDL-3000 using the
1.
default IP address (192.168.25.2), and the default administrator username (admin)
and password (admin).
Click Configuration->System to display the System Configuration screen.
2.
Click on the Def Cfg button at the bottom of the screen to reload the factory settings
3.
and automatically reboot the RDL-3000.
Wait for the reboot to complete (10 seconds) and login to the RDL-3000 using the
4.
default IP address (192.168.25.2) and the default administrator username (admin)
and password (admin).
70-00158-03-00
USER MANUAL
Proprietary Redline Communications © 2015 Page 148 of 254 April 17, 2015